Table of Contents
Advertisement
2
Product description
2.1
General
Modell t:
The EE371 transmitter features two freely selectable and scalable outputs for Td, Tf or Wv.
Modell S:
The EE371 switch has two relay outputs for control and alarm purposes. The status of the two relays
(configured for instance for early warning and main alarm) is indicated by LEDs.
The analogue outputs as well as the Td/Tf switch threshold and hysteresis can be set with the EE-PCS
Product Configuration Software, free download from www.epluse.com/configurator.
2.2
Dimensions in mm (inch)
32
1.3"
1.1"
spanner width:
27 or 24
G1/2" ISO or
1/2" NPT
2.3
Auto-calibration
A special auto-calibration procedure leads to high-precision measurement even in the low Td range.
The auto-calibration is performed every 30 minutes and takes approx. 3 minutes.
During the auto-calibration, the analogue outputs are frozen at the last measured value.
6
28
100
3.9"
48
1.9"
Manual EE371 Dew point transmitter
Advertisement
Table of Contents
