Labeling on Laser Use
The Z500 has, on the side of its sensor, a warning label as shown below.
Re-labeling
The following labels are provided, to be used selectively according to countries.
Be sure to turn off the sensor before replacing the label, or your hand or other
body parts may be exposed to the hazardous laser beam radiating from the
sensor.
Z500-SW2T
• for use in the U.S.: FDA label (Aperture label, Caution logo label, Certification
and Identification label)
• for use in countries other than the U.S.: Warning label according to EN/IEC
standards.
INTRODUCTION
Z500-SW6
Z500-SW17
Setup Manual
Z500
9