Table of Contents
Advertisement
SECTION 4
Appendix
Z500
66
Setup Manual
2
Note 1: Defined at 1/e
(13.5%) of the density at the light center. Light may, however, be
present outside this range and if the reflection factor of the light around the work-
piece is high compared to the workpiece, measurement may be affected.
Note 2: Error with respect to the theoretical line representing the displacement output for
measurement of OMRON standard quartz glass. The linearity varies with the
type of workpiece.
Note 3: Error with respect to the theoretical line representing the displacement output for
measurement of OMRON standard SUS blocks. The linearity varies with the
type of workpiece.
Note 4: Error with respect to the theoretical line representing the displacement output for
measurement of OMRON standard white alumina ceramics. The linearity varies
with the type of workpiece.
• Z500-SW17
120 mm
80 mm
Note 5: Displacement conversion value for peak-to-peak of displacement output. These
figures are for measurement of OMRON standard quartz glass (mirror reflection
mode) or OMRON standard SUS blocks (diffuse reflection mode) at the mea-
surement center. In strong magnetic fields, it may not be possible to maintain
resolution performance characteristics.
Note 6: These figures are for when the Sensor is connected to the Z500-MC10E/
MC15E, the average number of measurements is 16.
sent to PC via RS-232C cable for calculation of their average values.
Note 7: Displacement conversion value for peak-to-peak of displacement output (for
measurement of OMRON standard white alumina ceramic at the measurement
center). In strong magnetic fields, it may not be possible to maintain resolution
performance characteristics.
Note 8: With the Z500-MC10E/MC15E, at an average number of measurements of 64.
Measurement data are sent to PC via RS-232C cable for calculation of their
average values.
Note 9: Value for measurement with the space between the Sensor and the workpiece
(white alumina ceramic) secured with an aluminum jig.
Note 10: Higher power laser type (Class 3B) is also available. For further information,
please contact us.
±0.1 % max.
80 mm
120 mm
Distance
Measurement data are
Advertisement
Table of Contents
