Table of Contents
Advertisement
3-1-2 Internal Specifications
Use a DC power supply with countermeasures against high-voltage spikes (safe extra low-
CHECK
voltage circuits on the secondary side). Excessively high voltages can result in electric
shock.
Input Specifications
Item
Model
Input voltage
ON current (See note 1)
ON voltage (See note 1)
OFF current (See note 2)
OFF voltage (See note 2) 4.5 V min.
ON delay
OFF delay
Internal circuits
Output Specifications
Item
Model
Output voltage
Load current
ON residual voltage
OFF leakage current
Internal circuits
Do not exceed the maximum load current specified for the Controller.
NOTICE
Note 1: ON Current/ON Voltage
Note 2: OFF Current/OFF Voltage
Z500-MC10E (NPN mode)
12 to 24 VDC ±10%
5 to 15 mA
8.8 V max.
0.1 mA max.
RESET input: 10 ms max.
Other inputs: 0.5 ms max
RESET input: 15 ms max.
Other inputs: 0.7 ms max.
COM IN
+
Input
terminal
Z500-MC10E (NPN mode)
12 to 24 VDC ±10%
45 mA max.
2 V max.
0.1 mA max.
Output terminal
COM OUT
This refers to the current or voltage values needed to shift from the OFF→ON
state.
The ON voltage value is the potential difference between each of the input termi-
nals and COM IN.
This refers to the current or voltage values needed to shift from the ON→OFF
state.
The OFF voltage value is the potential difference between each of the input ter-
minals and COM IN.
Connecting External Devices
Specification
Z500-MC15E (PNP mode)
Input
terminal
COM IN
Specification
Z500-MC15E (PNP mode)
Load
+
SECTION 3
COM OUT
Load
Output terminal
Z500
49
Setup Manual
Advertisement
Table of Contents
