Long Time Exposure "On - JAI CV-M10BX Operation Manuals

4) Long Time Exposure "ON"

Use Swl switch on PK8080 board located inside camera.
MODE
LONG TIME EXPOSURE
To select the exposure time, use SW1 DIP switch on the rear panel.
1 FLD = EIA
CCIR
Note The exposure-duration is indicated as "FLD" in the above list.
:
Setting to higher number of FLD by SW1 DIP switch on the rear
panel leads to gain higher sensitivity.
Please note that Long-time Exposure does not work at Random
Trigger mode.
CV-M10
Pos. #l
OFF
: 1/60 sec.
: 1/50 sec.
- 15 -
Pos. Pos. #3
OFF
OFF
I
Pos. #4
ON
I