Mounting Of Equipment; Introduction - ABB IRB 760 Product Specification

1 Description

1.6.1 Introduction

1.6 Mounting of equipment

1.6.1 Introduction
General
Extra loads can be mounted on to the upper arm and on to the left side of the frame.
Holes and definitions of masses are shown in figure below.
For mounting of an external vacuum hose there are six holes on the upper arm
figure below. The max. weight for the vacuum hose and fastening device is 35 kg.
When using the holes, the weight of the vacuum hose shall be reduced from the
max. Handling capacity, for each variant respectively.
IRB 760-450/3.2
xx1000001147
Continues on next page
32
© Copyright 2021 ABB. All rights reserved.
Product specification - IRB 760
3HAC039612-001 Revision: R