2.2. Key Features
The following table describes the detailed features of the module.
Table 3: Key Features
Features
Function Interface
Power Supply
Transmitting Power
5G NR Features
LTE Features
Rx-diversity
4
GNSS Features
Antenna Connectors
1
HPUE is only for single carrier.
2
5G NR FDD bands only support 15 kHz SCS, and NR TDD bands only support 30 kHz SCS.
3
The maximum rates are theoretical and the actual values depend on the network configuration.
4
If you need the function of L2, contact Quectel Technical Support.
RG255C-GL_Mini_PCIe_Hardware_Design
Details
PCI Express Mini Card 1.2 Standard Interface
⚫
Supply voltage: 3.0–3.6 V
⚫
Typical supply voltage: 3.3 V
⚫
5G NR bands: Class 3 (23 dBm ± 2 dB)
⚫
5G NR n38/n40/n41/n77/n78/n79 HPUE
⚫
LTE bands: Class 3 (23 dBm ± 2 dB)
⚫
LTE B38/B40/B41/B42/B43 HPUE
⚫
Supports 3GPP Rel-17 Red. Cap. 5G NR sub-6
⚫
Supported modulations:
-
Uplink: QPSK, 16QAM, 64QAM and 256QAM
-
Downlink: QPSK, 16QAM, 64QAM and 256QAM
⚫
Supports SCS 15 kHz
⚫
Supports SA on operation mode
⚫
Supports Option 2
⚫
Max. transmission data rates
-
SA: 220 Mbps (DL), 100 Mbps (UL)
⚫
Supports 3GPP Rel-15
⚫
Supported modulations:
-
Uplink: QPSK, 16QAM and 64QAM
-
Downlink: QPSK, 16QAM and 64QAM and 256QAM
⚫
Supports 1.4/3/5/10/15/20 MHz RF bandwidth
⚫
Max. transmission data rates
-
150 Mbps (DL), 50 Mbps (UL)
Supports 5G NR/LTE Rx-diversity
⚫
Supports L1/L2/L5
⚫
Protocol: NMEA 0183
⚫
Data Update Rate: 1 Hz
ANT_MAIN, ANT_DRX, ANT_GNSS
1
: Class 2 (26 dBm +2/-3 dB)
1
: Class 2 (26 dBm ± 2 dB)
2
2
and 30 kHz
3
:
3
:
5G Module Series
11 / 57