Wilo Yonos GIGA-N 80 Installation And Operating Instructions Manual page 44

en
12.3
2200
Fig. 38: Entering the setpoint
8.6.2 Changing to menu mode
2 s
ON
1
2.0.0.0
12.3
Fig. 39: Standard menu mode
2 s
ON
1
5.0.0.0
12.3
Fig. 40: Service mode menu
6.0.0.0
E000
Fig. 41: Fault event mode menu
44
Operation
ƒ
1.0.0.0
The display changes to menu <1.0.0.0> and the setpoint starts flashing. Turning the
operating button increases or decreases the setpoint.
RPM
ƒ
1.0.0.0
The new setpoint will be accepted and the display will return to the status page.
1800
RPM
To change to the menu mode:
2 s
ƒ
2 seconds (except in event of a fault).
Standard behaviour
The display changes to menu mode. Menu <2.0.0.0> is displayed.
±
Service mode
When service mode is activated (using DIP switch 1), menu <5.0.0.0> is displayed first.
±
Fault event
In the event of a fault, menu number <6.0.0.0> is displayed
±
Turn the operating button.
To confirm the change, press the operating button.
While the display is showing the status page, press the operating button for
WILO SE 2020-10