Table of Contents
Advertisement
Configuration software KS2000
Fig. 19: KS2000 - parameterization of the DALI/DSI devices - lighting control / queries
Indirect light control (control via the indirect DALI commands [} 53] for lamp power)
Buttons that send an associated DALI command to the selected device are available for the main functions.
Switching off
Switches off the lamp connected to the DALI device without fading (sends DALI command 0 [} 53]
).
dec
Down
Dims the DALI device over a period of 200 ms using the selected fade rate [} 32] (sends DALI command 2
[} 53]
)
dec
Up
Brightens the DALI device over a period of 200 ms using the selected fade rate [} 32] (sends DALI
command 1 [} 53]
)
dec
Step Down
Lowers the current lamp power value by one graduation without fading (sends DALI command 4 [} 53]
),
dec
assuming the lamp has not already been set to its parameterized minimum (MIN) value. If the lamp has
already been set to its MIN value, it is not changed, and remains switched on. The minimum value can be
parameterized on the Variables [} 31] tab.
Step Up
Sets the current lamp power value one graduation higher without fading (sends DALI command 3 [} 53]
),
dec
unless it is already switched on. If the lamp is switched off, it is not switched on.
KL6811
Version: 2.0.0
29
Advertisement
Chapters
Table of Contents
