Fig. 16 Ks2000 - Parameterization Of The Dali/Dsi Devices - Address-Type - Beckhoff KL6811 Documentation

Fig. 16: KS2000 - parameterization of the DALI/DSI devices - address-type
Command and data
Direct control of the lamp power
The first command in this menu is supported by means of an intensity slider:
• set the intensity slider to the desired value or
• enter a value into the Data field
and click the Send DALI command button. The KL6811 sends this value as a direct DALI command [} 53]
for the lamp power to all the selected DALI devices.
Further commands
The command number is shown in decimal format for all other commands. They are described under this
number in the section covering indirect DALI commands [} 53] for lamp power.
Settings for the individual DALI devices
Four dialog masks are available to control every recognized DALI device:
• Lighting control/query [} 28] (click directly on Device #xx)
• Variables [} 31]
• Groups [} 34]
• Scenes [} 34]
KL6811 Version: 2.0.0
Configuration software KS2000
27