Beckhoff KL6811 Documentation page 45

Dali/dsi master terminal with integrated power supply
Table of Contents

Advertisement

Bit
SB.7
SB.6
Name
RegAcces
Error
s
Legend
Bit
Name
SB.7
RegAccess 0
SB.6
Error
SB.5 to SB.3 -
SB.2
BC
Collision
(only in
DALI
mode)
SB.1
FC
Collision
(only in
DALI
mode)
SB.0
Toggle
Register communication
Control byte for register communication
The control byte (CB) is located in the output image [} 43], and is transmitted from the controller to the
KL6811.
Bit
CB.7
CB.6
Name
RegAcces
R/W
s
Legend
Bit
Name
CB.7
RegAccess 1
CB.6
R/W
CB.5 to CB.0 Reg. no.
KL6811
SB.5
SB.4
-
-
Description
Acknowledgement for process data mode
bin
0
No error
bin
1
Error:
bin
• In DALI mode if the internal DALI power supply unit of the KL6811 is
used: overload of the internal DALI power supply unit of the KL6811
(bus under-voltage)
• In DSI mode: error message from one (or several) of the DSI
devices
reserved
0
no collision
bin
1
DALI collision detected on the backward channel: during the transfer of
bin
a DALI telegram, a collision with the send data of another DALI slave
was detected. The bit SB.2 is reset with the next edge of the bit SB.0,
unless another DALI collision has occurred.
0
no collision
bin
1
DALI collision detected on the forward channel: during the transfer of a
bin
DALI telegram, a collision with the send data of another DALI master
was detected. The bit SB.1 is reset with the next edge of the bit SB.0,
unless another DALI collision has occurred.
An edge of SB.0 is the acknowledgement for the end of the telegram cycle
initiated with the toggle bit of the control byte (CB.0 [} 44]). The telegram was sent
via the DALI/DSI bus. In DALI mode, the collision bit (SB.1) provides information
about any collisions that may have occurred.
CB.5
CB.4
Reg. no.
Description
Register communication switched on
bin
0
Read access
bin
1
Write access
bin
Register number:
Enter the number of the register [} 46] that you want to
- read with input data word 0 here.
- write to with output data word 0.
Version: 2.0.0
Access from the user program
SB.3
SB.2
-
BC Collision FC Collision Toggle
CB.3
CB.2
CB.1
SB.1
SB.0
CB.0
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ks6811

Table of Contents