Parameterization With Ks2000; Fig. 16 Display Of The Fieldbus Station In Ks2000 - Beckhoff KL31 2 Series Documentation

4.2

Parameterization with KS2000

Connect the configuration interface of your fieldbus coupler with the serial interface of your PC via the
configuration cable and start the KS2000 Configuration Software.
Click on the Login button. The configuration software will now load the information for the
connected fieldbus station.
In the example shown, this is
• a Ethernet Coupler BK9000
• a digital input terminal KL1xx2
• a precise two-channel analog input terminal for signals between 0 and 2 V, KL3172
• a bus end terminal KL9010
Fig. 16: Display of the fieldbus station in KS2000
The left-hand KS2000 window displays the terminals of the fieldbus station in a tree structure.
The right-hand KS2000 window contains a graphic display of the fieldbus station terminals.
In the tree structure of the left-hand window, click on the plus-sign next to the terminal whose parameters
you wish to change (item 2 in the example).
KL31x2 Version: 2.4.0
Configuration Software KS2000
31