Table of Contents
Advertisement
Appendix
Command
Command no.
00
0
hex
dec
01
1
hex
dec
02
2
hex
dec
03
3
hex
dec
04
4
hex
dec
05
5
hex
dec
06
6
hex
dec
07
7
hex
dec
08
8
hex
dec
09
... 0F
9
... 15
hex
hex
dec
dec
1n
16
31
hex
dec ...
dec
(n: 0
...
hex
F
)
hex
54
Description
Switch off lamp immediately (without fading).
Turn brighter for 200 ms with selected step speed.
Turn darker for 200 ms with selected step speed.
Increase the current lamp power value by one step (without fading). If the lamp is switched
off, it is not switched on.
Reduce the current lamp power value by one step (without fading), if the lamp is not al-
ready at its parameterized minimum value. If the lamp is already at its minimum value, it is
not changed and remains switched on.
Set the current lamp power value to the parameterized maximum value. If the lamp is
switched off, it is switched on.
Set the current lamp power value to the parameterized minimum value. If the lamp was
switched off, it is switched on.
Reduce the current lamp power value by one step (without fading). If the lamp is already at
its minimum value, it is switched off.
Increase the current lamp power value by one step (without fading). If the lamp was
switched off, it is switched on and set to its parameterized minimum value.
reserved
Set the lamp power value to the value stored for the specified scene (n).
Version: 2.0.0
Answer
-
-
-
-
-
-
-
-
-
-
-
KL6811
Advertisement
Chapters
Table of Contents
