Fig. 17 Ks2000 - Parameterization Of The Dali/Dsi Devices - Visual Selection Feedback; Fig. 18 Ks2000 - Parameterization Of The Dali/Dsi Devices - Sending Of Dsi Commands - Beckhoff KL6811 Documentation

Configuration software KS2000
Visual selection feedback
Fig. 17: KS2000 - parameterization of the DALI/DSI devices - visual selection feedback
If the option visual selection feedback is enabled, the selected device (in the example device #04) sets its
current lamp power value to the parameterized maximum value.
Sending DSI commands
In DSI operation [} 39] you can use this mask to send the same light intensity to all the connected DSI
devices:
• set the intensity slider to the desired value or
• enter a value into the Data field
and click the Send DSI command button. The KL6811 sends this value to all the connected DSI devices.
Fig. 18: KS2000 - parameterization of the DALI/DSI devices - sending of DSI commands
4.4.1.1 Lighting control / query
Click on the device number (in this example, Device #00). A dialog mask appears with areas for direct lamp
control, indirect lamp control and query.
Direct light control (control via direct DALI commands [} 53] for lamp power)
Sets the lamp intensity to the specified value.
28 Version: 2.0.0 KL6811