Parameterization With Ks2000 - Beckhoff KL8001 Documentation

Commissioning
The KS2000 software facilitates commissioning of machine components or their fieldbus stations: Configured
settings can be transferred to the fieldbus modules by means of a download. After a login to the terminal
station, it is possible to define settings in couplers, terminals and Fieldbus Box modules directly online. The
same high-level dialogs and register access are available for this purpose as in the configuration phase.
The KS2000 offers access to the process images of the bus couplers and Fieldbus Box modules.
• Thus, the coupler's input and output images can be observed by monitoring.
• Process values can be specified in the output image for commissioning of the output modules.
All possibilities in the online mode can be used in parallel with the actual fieldbus mode of the terminal
station. The fieldbus protocol always has the higher priority in this case.
4.2

Parameterization with KS2000

Connect the configuration interface of your Fieldbus Coupler with the serial interface of your PC via the
configuration cable and start the KS2000 Configuration Software.
Click on the Login button. The configuration software will now load the information for the connected
fieldbus station.
In the example shown, this is
• a BK9000 Bus Coupler for Ethernet
• a KL1xx2 digital input terminal
• a KL9060 Adapter Terminal for connecting power terminals (which is not yet displayed by
some versions of KS2000)
• a KL8001 Power Terminal for connecting Siemens contactors of the Sirius R3 series
• a ZS1010-1610 [} 45] bus end plug (some versions of KS2000 still show the bus end plug as
the KL9010 End Terminal)
KL8001 and KL9060 Version: 2.0.0
KS2000 Configuration Software
23