Trunking Features Programming Screen; Trunking Features Programming Screen Field Description Table - Icom IC-F620 Programming Software Manual

TRUNKING FEATURES PROGRAMMING SCREEN

T F
RUNKING EATURES
This programming screen allows the programmer to edit additional trunking parameters
used by the radio.
The preceding screen shot shows the defaults for this programming screen. Double click
on the field you wish to edit. The next table is a description for each row in each group:
T F
RUNKING EATURES
Group Row
PassPort Handshake
Features Melody
PassPort Handshake
Features Retry Limit
PassPort Handshake
Features ACK Wait
Time
PassPort Fade Time
Features
CS-F620TR Programming Software Manual
P S
ROGRAMMING CREEN
P
ROGRAMMING
Description
Select from various radios tones in menu.
This is the tone used for each transmission
when handshaking with a PassPort system.
Enter from 0 to 255. This is the number of
times a handshake will be attempted with a
PassPort system until a "Busy" tone is
emitted from the radio. The user at this
point needs to release the PTT key and try
again.
Enter from .25 to 65.535. This is the amount
of time the radio will wait for a handshake
acknowledge.
Enter from 0 to 7.5. This is the amount of
time the receiver will continue to monitor
the current channel in the event the channel
fades.
(rev 1.0) -
I : Located in Common Folder.
CON
S F D
CREEN IELD ESCRIPTION
Default
PassPort
Handshake
6
0.690
2.000
Trunking Features Programming Screen
T
ABLE
Suggested
Settings
PassPort
Handshake
5
0.690
2.000
64