Repeater Setting Programming Sub-Screen Field Description Table - Icom IC-F620 Programming Software Manual

At the head of this screen is pertinent information concerning the current selected system.
Each line in this screen can be used to enter repeater channel information. Note that to
delete a row, you can right click on almost any field in the programming screen and
select "Delete" from the menu that appears.
R S
EPEATER ETTING
Group Field
CH
Atr
Frequency RX
Frequency TX
W/N
RF Pwr
Invert RX Data
CS-F620TR Programming Software Manual
P S
ROGRAMMING
Description
The total number of lines displayed will
indicate the number of LTR repeater channels
for the system being edited. You can enter up
to 20 repeater channels before getting an
"overflow" error.
Select "Home Repeater" or "Return". If you
select "Home Repeater," then this repeater
channel will be the home repeater channel. You
can only have one home repeater channel. If
you have already selected one channel as a
home repeater, selecting another for that status
will automatically deselect the previous setting.
Enter from 1.000000 to 520.000000 (though, of
course, the radio will only function for
frequencies it is designed for). This is the radio
receive frequency for this repeater channel.
Enter from 1.000000 to 520.000000 (though, of
course, the radio will only function for
frequencies it is designed for). This is the radio
transmit frequency for this repeater channel.
Select "Wide" or "Narrow". Specify if the
repeater channel you are attempting to utilize is
using wide or narrow band channels.
Set to "High" or "Low". Specify if you wish to
transmit to this repeater channel using high or
low power.
Select "On" or "Off". Select whether or not the
radio should expect inverted RX Data.
-S F D
UB CREEN IELD
LTR Programming Screen
(rev 1.0) -
T
ESCRIPTION ABLE
Default Suggested
Settings
No user No user
entry. entry.
Until Mandatory
field for one
one of the
repeater of the rows.
channel You will get
rows is
a in each
selected as
Atr row until
a home
you select
repeater.
one of the
For each
rows as the
row there
home
after, this
repeater. That
field will
will clear the
be blank.
in all
rows. Consult
your LTR
system
operator for
information
on which
repeater
channel is
"home".
Blank System
operator
provided.
Blank System
operator
provided.
Wide System
(Blank) operator
provided.
High Set as
(Blank) needed.
Off (Blank) System
operator
provided.
35