Icom IC-F620 Programming Software Manual page 40

Field Description
CH Each line can contain a new group. You can
enter up to 250 groups per LTR system. Don't
let the "CH" designation of this column throw
you off, each number in this column is just a
reference number and have nothing to do with
the "CH" column in the LTR programming
screen.
Group Tag Double click here to enter a text description for
this group (as described on page 13). You can
enter up to 10 characters for this field.
RX ID Enter from 1 to 250. Set RX Group ID.
TX ID Enter from 1 to 250. Set TX Group ID. You
must enter information into the RX ID field
before attempting to change this field. If you
attempt to enter this field first, the program will
re-direct you to RX ID field. After you enter
information in RX ID, this field will show a "<-
" indicating that the contents of the TX ID field
is the same as the RX ID field. You can
change this field to be different from the "RX
ID" field for special purposes.
Scan Select "Yes" or "No". Determines if the group
Member will be added to the group scan list.
Scan TX Select "Yes," "No" and "Receive Only". When
Inh set to "Yes," the radio is prevented from
transmitting on this group if this group is
decoded while in group scan mode. Setting to
"No" allows full transmit and receive on this
group. Setting this to "Receive Only" makes
this group a receive only group that cannot be
transmitted on (regardless whether the user is in
scan mode or not).
Phone Select "Yes," "No" or "Primary Group".
Selecting "Yes" allows this Talk Group to use
interconnect on the LTR system if the Phone
Request key is pressed. Selecting "No"
disallows the use of the Phone Request key
function. "Primary Group" selects primary
phone group.
When finished editing here, select "OK" to save the information entered here. Select
cancel to discard any edits.
CS-F620TR Programming Software Manual
Default
No user entry.
Until data is
entered in this
field.
Until data is
entered in the "RX
ID" field. This
field then changes
to "<-".
Yes
No (Blank)
No (Blank)
LTR Programming Screen
(rev 1.0) -
Suggested
Settings
No user entry.
Mandatory
field - set as
needed. You
cannot enter any
other information
on this row until
this field has been
entered.
Mandatory
field. System
operator provided.
Mandatory
field – normally
leave as set after
data has been
entered in the "RX
ID" field. System
operator provided.
Set as needed.
Set as needed.
Set as needed.
37