Group
Field
TG
Dec. Pri.
TG
TOT
Talk
Around
ATB Ring
Back
Scan
Scan
Enable
Scan
Block
Mode
CS-F620TR Programming Software Manual
Description
Select "Enable" or "Disable". Select "Enable"
if you wish to force monitor the Primary Group
(the first group listed in the LTR Talk Group
Setting programming sub-screen). Note,
selecting "Enable" here will also turn the "CH"
field of the first row of the LTR Talk Group
Setting programming sub-screen red, indicating
forced monitor. If set to "Enable," it does not
matter if the radio is in scan mode or not, or
whether CH 1 (primary group) is a scan
member or not, the Primary Group will still be
monitored.
Set to "OFF" (manually type the word in) or
enter from 0 to 255 seconds. Setting this
prevents the radio from transmitting for a
period longer than this timer.
Select "None" or any of the Conventional or
LTR systems that appear in this list. This is the
system reverted to if the Talk Around key is
pressed. When "None" is selected here and the
Talk Around key is pressed, LTR simplex
operation on the home channel is allowed.
Select "Enable" or "Disable". If a user attempts
to transmit and the system is busy, enabling
this will sound a ringing tone when the system
is ready to accept traffic again.
Select "Enable" or "Disable". Selecting
"Enable" will allow this system to be scanned
when performing system scan. Selecting
"Disable" will prevent this system from being
scanned. Even if the User Edit field is set to
"Enable" the user will not be able to add this
system to the list of systems scanned (if
"Disable" is selected in this field).
Select "Enable" or "Disable". When enabled,
this will cause the radio to receive all groups in
a range between the talk groups listed in the
LTR Talk Group Setting programming sub-
screen (see page 36) under CH 2 and CH 3.
Note: Ensure that the group listed under CH 2
is numerically lower than the group in CH 3 or
this field will be marked with a
work. These groups will be scanned no matter
the setting of the Scan Member field in the
LTR Talk Group Setting programming sub-
screen. If you do not intend to use Block Mode
do not assign a Scan Type key.
Default
OFF
None
(Blank)
Enable
(Blank)
Enable
(Blank)
Disable
(Blank)
and will not
LTR Programming Screen
(rev 1.0) -
Suggested
Settings
Set as
needed.
Consult your
system
operator.
Set as
needed.
Set as
needed.
Set as
needed.
32
Need help?
Do you have a question about the IC-F620 and is the answer not in the manual?
Questions and answers