Page 1
INSTRUCTION MANUAL VHF DIGITAL TRANSCEIVERS iF3230D Series UHF DIGITAL TRANSCEIVERS iF4230D Series This device complies with Part 15 of the FCC Rules. Opera- tion is subject to the condition that this device does not cause harmful interference. The photo shows the VHF transceiver (S type)
U.S. Patent Nos. #5,870,405, #5,826,222, #5,754,974, #5,701,390, #5,715,365, #5,649,050, #5,630,011, #5,581,656, #5,517,511, #5,491,772, Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incor- #5,247,579, #5,226,084 and #5,195,166. porated (Japan) in Japan, the United States, the United Kingdom, Germany,...
Use and charge only specified Icom bat- attachment. Exposing the inside of the transceiver to dust or tery packs with Icom radios or Icom chargers. Only Icom bat- water will result in serious damage to the transceiver. tery packs are tested and approved for use with Icom radios DO NOT or charged with Icom chargers.
CAUTION: Changes or modifications to this transceiver, not the installed battery pack or batteries will become exhausted, expressly approved by Icom Inc., could void your authority to and will need to be recharged or replaced. operate this transceiver under FCC regulations.
ACCESSORIES Supplied accessories ■ Battery pack NOTE: Some accessories are not supplied, depending on the transceiver version. To attach the battery pack: Slide the battery pack in the direction of the arrow (q) until Battery pack Battery charger* the battery release button makes a ‘click’ sound. Belt clip AC adapter* NOTE: Push on the bottom of the pack to make sure the...
Page 7
ACCESSORIES Belt clip Jack cover To attach the belt clip: To attach the jack cover: Remove the battery pack if it is attached. Attach the jack cover to the [MIC/SP] jack. ( w Slide the belt clip in the direction of the arrow until the belt Tighten the screws.
PANEL DESCRIPTION Front panel ■ y DEALER-PROGRAMMABLE KEYS [P0] to [P3] Desired functions can be independently programmed by your dealer. (p. 5) u FUNCTION DISPLAY (p. 4) Displays a variety of information such as an operating channel number, channel name, User Set mode contents, Speaker and so on.
Need help?
Do you have a question about the IC-F3230D Series and is the answer not in the manual?
Questions and answers