Icom IC-F620 Programming Software Manual page 47

Field Description
Frequency Can be set from 1.000000 to 520.000000
(MHz) (though, of course, the radio will only function
for frequencies it is designed for).
When done editing in this programming screen you can proceed to other programming
screens, save your programming parameters to a file or proceed to writing the
information to the radio (assuming that editing has been finished for all other required
programming screens also).
CS-F620TR Programming Software Manual
Default
Blank
Seed Frequency Programming Screen
(rev 1.0) -
Suggested
Settings
Set as needed.
Note: any
frequencies
programmed here
should be "home"
channels if the
PassPort system is
not setup for re-
direct and should
be collect channels
if the PassPort
system is setup for
re-direct.
44