Laser Scanner (1D) Settings; Laser Setting - Casio DT-X200 Series Software Manual

3.6 Laser Scanner (1D) Settings

This function only applies to models equipped with a laser scanner (1D).
Refer to Chapter 2, "2.9 Laser Scanner (Barcode)" for details of this function.

Laser Setting

3.6.1
Select Start -> Settings -> Control Panel - Scanner settings.
Use the tool below to change scanner device settings.
[Read barcode]Tab
Tab
Read barcode
Driver Mode
Specify the 1D code to read.
Multiple symbologies can be specified.
This tab is to set up "Enable" or "Disable" for 1D symbologies, and to
specify options.
- Min (No. of minimum readable digits)
Max (No. of maximum readable digits)
-
- Output format
Check-digit
-
- Check-digit output
[Driver Mode]Tab
Explanation
115