Casio DT-X200 Series Software Manual page 147

[IP Information]Tab
vi The display transitions to the Wireless Properties screen after the Connect button is pressed.
Wireless Network Properties screen (example screen shot)
Item
Network name(SSID)
This is an ad hoc
network
Encryption
Authentication
ⅶ After connection is complete, the following icon is displayed on the task bar.
Specify the network (SSID) name.
Check the check box to communicate in AdHoc mode.
Note, however, that the AdHoc mode is not recommended because
connection problems may occur.
Select AES or TKIP as the encryption type.
Select any of the following as the authentication method.
WPA, WPA2, WPA2-PSK, WPA-PSK, share, open
147
Eexplanation