Remove The 1D Laser; Remove The Battery Holder/Battery Pack - Casio DT-X5M10E Service Manual

Removing the 1D Laser
1. Remove the battery holder/battery pack (see page 9), and separate the front and rear case assemblies (see
page 10).
2. Remove screws 1
3. Lift the 1D laser assembly
- 2, and release cable 3
, off the front case assembly.
4
Figure 2 - 4 - Removing the 1D Laser
4. 1D Laser Assembly
• 2 Screws
from its locking collar.
— 12 —