Casio DT-X200 Series Software Manual page 90

(1) Basic settings
Item
SSID
ADHOC
Security
Authentication
method
Encryption method
WEP key index (*1)
WEP key length (*1)
WEP key (*1)
PSK key (*2)
EAP user name
EAP password
EAP domain name
EAP certificate
Stealth SSID (*3)
(*1) Setup is only required if security is WEP and the authentication method is open, shared, or
EAP-MD5.
(*2) Setup is only required if the authentication method is PSK.
(*3) This is as follows with MS standard and Casio settings.
- MS standard setup (WEC7): Automatic setup (non-stealth with a detected SSID, stealth
when SSID is added manually)
- Casio settings: Always set for stealth
Specify the SSID.
Text string (up to n characters)
Specify whether to use ad hoc mode.
Infrastructure/ ad hoc
Specify the security system.
None/ WEP/ WPA/ WPA2
Specify the authentication method.
Open
Shared
PSK
EAP-PEAP
EAP-TLS
EAP-MD5
Specify the encryption method.
None/ WEP/ TKIP/ AES
Set the index for the WEP key.
0~3
Set the WEP key length.
64/128bit
Set the key to use for WEP authentication.
HEX text string
*WEP key length 64 bits: 20 characters
129 bit: 52 characters
Set the key to use when PSK authentication is
specified.
ASCII text string
Set the user name to use if EAP-* is specified.
Set the password to use if EAP-PEAP or EAP-MD5 is
specified.
Set the domain name to use if EAP-PEAP is
specified.
Set the certificate to use if EAP-TLS is specified.
Specify whether to use stealth setting with the SSID.
Stealth/ non-stealth
90
Content Default
Infrastructure