Imager (1D/2D Codes); Barcode Scan Specification - Casio DT-X200 Series Software Manual

2.10 Imager (1D/2D codes)

This section explains the specifications for scanning 1D and 2D barcodes.

Barcode scan specification

2.10.1
The symbols which can be scanned by the imager are as follows.
(1) 1D code (barcode)
Code
EAN8/JAN8
EAN13/JAN13
UPC-A
UPC-E
Code39
Codabar (NW7)
Interleaved2of5 (ITF)
Code93
Code128/EAN128
(Code A/B) (*2)
Code128/EAN128
(Code C) (*2)
MSI (Plessey)
IATA
Code11
GS1 DataBar
Omnidirectional
(RSS-14)
GS1 DataBar Truncated
（RSS-14 Truncated)
GS1 DataBar Limited
(RSS Limited)
GS1 DataBar Expanded
(RSS Expanded)
ISBT (*1)
Code32 (*3)
Scan Check
No. of Character
digits (*2)
Always
8 (+2/5)
enabled
Always
13 (+2/5)
enabled
Always
12 (+2/5)
enabled
Always
6 (+2/5)
enabled
Enable/
1~22
disable
(0~48)
2~26 Enable/
(2~60) disable
4~42 Enable/
(4~80) disable
1~35 Always
(0~80) enabled
1~28 Always
(0~80) enabled
1~56 Always
(0~80) enabled
4~26 Always
(4~48) enabled
4～24 Always
disabled
（4～80）
Always
1～40
enabled
（1～80）
(2 digits)
Always
14
enabled
Always
14
enabled
Always
14
enabled
1~40 Always
(1~80) enabled
Always
1~28
enabled
Always
9
enabled
Check
Character Other functions
output (*2)
Enable/
2-digit/ 5-digit add-on
disable
Enable/
2-digit/ 5-digit add-on
disable
Enable/ NS output
disable 2-digit/ 5-digit add-on
NS output
Enable/
2-digit/ 5-digit add-on
disable
UPC-A conversion
Start/stop bit output
Enable/ switch
disable Full ASCII
conversion
Enable/ Start/stop bit output
disable switch
Enable/
-
disable
Always
-
disabled
Always
-
disabled
Always
-
disabled
Enable/
-
disable
Always
-
disabled
Always
-
disabled
Always
-
disabled
Always
-
disabled
Always
-
disabled
Always
-
disabled
Always
-
disabled
Always
enabled
57
Remarks
Code A/B
Code C
Only a full
microwave
is possible.
Only a full
microwave
is possible.