Casio DT-X200 Series Software Manual page 159

Receive screen
(1) Receiver Mode screen (duplicate side only)
The following Receive screen is displayed when the "1. Receiver Mode" button on the duplicate is
pressed.
First select which of the following modes to receive in.
 Normal Copy: In this mode, the data from the parent unit is received and copying is finished,
then the tool closes.
 Ripple Copy: In this mode, the data from the parent unit is received and copying is finished,
then the duplicate becomes the parent unit, and the data is sent to other duplicates.
No Item
.
1 "1 Normal Copy >>"
button
2 "2 Ripple Copy >>"
button
3 "<< Back" button
4 "Exit" button
Select the same mode on the parent unit (the terminal that operates in Sender mode) as well.
Communication proceeds even if different modes are selected on the parent unit and the duplicate,
but if both terminals are communicating in the same mode, it takes less time for communication to
start.
Operation
Data is received in Normal Copy mode, and the
display transitions to the Group Name Settings
screen*.
Data is received in Ripple Copy mode, and the
display transitions to the Group Name Settings
screen * .
Return to the previous screen.
Closes this tool
159
Key operation
Press either "1"
or "F2"
Press either "2"
or "F3"
Press the F1 key
-