Led Control - Casio DT-X200 Series Software Manual

LED control

2.5.1
The main functions are as follows.
For details of the library, refer to the System Library Manual.
(1) User notification LED
This is used for alarm notification, etc. Use as the scanner scanning LED has priority for lighting.
This LED can be controlled from the OS, which can make it light for a set period.
Lighting specification
Item
Blink interval
Time continuously ON
(2) Scanner scanning LED
This is used for notification of a scanning result.
Lighting specification
Item
Scanning successful
Scan error
(3) W-LAN connection status LED
This is used for notification of W-LAN wireless connection status.
Lighting specification
Item
Connection established via
wireless LAN
Time continuously ON
Use as the scanner scanning LED has priority.
–
Blinking red, on for 1 second, off for 2 seconds
30 minutes (off when Voltage detector is detected.)
On in green for a specified period of time, then off.
On in red for a specified period of time, then off.
On in orange for 1 second, off for 2 seconds
28
Specification
Specification
Specification