Casio DT-X200 Series Software Manual page 171

(3) Screen display when configuration failed
If configuration was unsuccessful, the details of the error are displayed in a message box.
The list of messages is described later.
(4) Screen display when reading was successful, with the /D option
(USA/EU/Japan)
The screen in (1) above is displayed, with "Successfully finished" replaced by "Current Settings".
If the data is illegal, the display for "Country:" is "Undefined Code(xx)".
xx indicates the set data.
(5) Screen display when reading was successful, with the /D option (custom)
The screen in (2) above is displayed, with "Successfully finished" replaced by "Current Settings".
(6) Screen display when reading failed, with the /D option
If reading was unsuccessful, the details of the error are displayed in a message box.
The list of messages is described later.
- Termination status
This tool sets termination status on termination. Termination status can be referred to if the
program was started from a kitting tool or from a batch file.
Termination status is 0 if configuration succeeded.
Termination status is an error number if configuration failed (see error numbers below).
- List of error messages and error numbers
Error
No.
1 The terminal is not supported.
2 Failed to open the ini file.
3 The ini file is wrong.
4 Failed to establish the settings.
5 Failed to verify the settings.
6 Failed to retrieve the settings.
Error message
The terminal was not configurable
ini file opening error
ini file is incomplete
Writing to the terminal failed
The data differs between writing and reading
Reading configuration values from within the
terminal failed
171
Cause