Casio DT-X200 Series Software Manual page 158

Main screen
(1) Start the Copy Devices Tool
Select Start -> Programs -> Utilities -> Copy Devices.
The following Startup screen is displayed, so start the menus on the parent unit and the duplicate.
Duplicate side: Press the "1. Receiver Mode" button (a blue bar).
Parent unit side: Press the "2. Sender Mode" button (a green bar).
No Item
.
1 "Receiver Mode >>"
button
2 "Sender Mode >>"
button
3
"Version" label
4 "Exit" button
(2) Check the creation of backup data (parent unit side only)
The following dialog is displayed if no backup data exists for the parent unit side.
Yes: Go to the Group Name Input screen. Refer to "(4) Group name input".
No: Return to the previous screen.
If backup data exists, go immediately to the Group Name Input screen.
Operation
The terminal changes into Receiver mode,
operating as the duplicate, and transitions to the
Receiver Mode Selection screen.
The terminal changes into Sender mode, operating
as the parent unit, and transitions to the Sender
Mode Selection screen.
This displays the version of this tool.
Closes this tool
158
Key operation
Press either "1"
or "F2"
Press either "2"
or "F3"
-
-