Laser Scanner (1D) Settings; Laser Setting - Casio IT-G500 Series Software Manual

3.5 Laser Scanner (1D) Settings

This function only applies to models equipped with a laser scanner (1D).
Refer to Chapter 2, "2.9 Laser Scanner (Barcode)" for details of this function.
3.5.1

Laser Setting

Select Start -> Settings -> System -> Scanner Setting.
Setting the scanner device, you can change from the following Tool.
[Read barcode]Tab
Tab
Read barcode
Driver Mode
Specify the 1D code to read.
Multiple symbologies can be specified.
This tab is to set up "Enable" or "Disable" for 1D symbologies, and to
specify options.
- No.of read digite(Min)
- No.of read digits(Max)
- Output format
- Check-digit
- Check-digit output
[Driver Mode]Tab
Explanation
129