2.8 Power control
This section explains the power control functions.
No.
Function
1
Power On
2
Power Off
3
Memory check
4
Power key control
5
Reset and resume
control
Recharge settings *
6
7
Power-saving control
* Refer to "3.1.8 Eco recharge settings" about the setting tool.
Turns the DT-X200 unit on.
There are 5 types of factor that turn power on.
Turns the DT-X200 unit off.
There are 6 types of factor that turn power off.
Checks the status of memory after power is turned on. Displays a
warning message on the screen if the memory is corrupted.
Settings can be made to disable the Power key or prohibit turning the
power off.
There are reset methods based on various conditions (5 types).
A reset clears program execution status, but resume restores the
program execution state that preceded the power being turned off.
Provide a functions from a tool to set the terminal recharge method.
Normal: Recharge normally.
Eco charge: Use Eco recharge
There are the following 5 control methods.
① Sleep
② Auto Power OFF (APO)
③ Dimming/ ABO (Auto Backlight OFF)
④ CPU clock frequency control
⑤ Virtual off (wireless standby)
34
Overview