Power Control - Casio DT-X200 Series Software Manual

Power control

2.9.7
(1) Module power control during non-use
In order to save power, the scanner module is switched to standby mode when laser light is not being
emitted.
(2) Virtual Off
The barcode scanner does not perform any particular processes. Even if the device terminal
transitions to Virtual Off, the barcode scanner performs the same process as when it is on. If it is
necessary to suppress the operation of the barcode scanner when Virtual Off occurs, the application
program should perform the following process.
Refer to the Laser Scanner Library Manual about library functions.
Status
During scanning
(Single scanning)
During scanning
(When using library
functions)
Key operation is disabled during Virtual Off, so the laser does not light even if a trigger key is pressed.
Also, the trigger keys cannot be raised to turn the power on during virtual off.
[Reference] Refer to "2.8.4 Power-saving control" about power-saving control.
On transition to virtual off
Turn the laser off
Turn the laser off
56
On cancellation of virtual off
No action
Turn the laser on
(Call a library function)