Precautions - Casio DT-X200 Series Software Manual

Precautions

2.7.3
The following operations on FlashDisk and Micro SD card risk corrupting some or all of the data they
contain.
(1) Reset during data writing
If a reset request is issued during data writing, and Off process is attempted within the specified
period. Files are retained if the Off process was completed. However, the operating status of the
device may not allow completion of the Off process. In that case, the disk folder itself may be
corrupted, so do not use reset while data is being written.
(2) Suspend/ resume during data writing
If a suspend/ resume occurs during data writing, the writing process continues after resume.
However, if the card is inserted or removed during Suspend, or if a reset is performed, this
continuation is not possible, so suspension during writing should be avoided whenever possible.
(3) Cradle disconnection during data writing via the cradle
The file being written will suffer an error and will not be retained, so do not disconnect the cradle
during writing.
(4) Removal of the Micro SD card during data writing
The file being written will suffer an error and will not be retained, and the content of the SD card
itself could be corrupted, so do not remove the card during writing.
33