Using The Laser Scanner (Laser Models - Casio IT-G500-C16E User Manual

Using the Laser Scanner (Laser Models)

1. After turning on the power, position the laser scanner close to a bar code and then
press the trigger key.
2. The laser emits light and scans the bar code. If scanning is completed normally,
Indicator 2 displays a green light.
Important!
If you are unable to scan a bar code, try changing the angle at which the scanner
•
is held or distance from the scanner to the bar code, and then try scanning
again.
This Handheld Terminal is capable of scanning bar codes at a distance of
•
about 46-550 mm. Furthermore, the distance at which scanning is possible may
vary according to the bar code symbology.
E-24