Using The Laser Scanner - Casio IT-300-35E Important Notes

Using the Laser Scanner

1. After turning on the power, position the laser scanner close to a bar code and then
press the trigger key.
2. The laser emits light and scans the bar code. If scanning is completed normally,
Indicator 2 displays a green light.
Important!
x
If you are unable to scan a bar code, try changing the angle at which the scanner
is held or distance from the scanner to the bar code, and then try scanning
again.
x
This Handheld Terminal is capable of scanning bar codes at a distance of
about 40-400 mm (1
scanning is possible may vary according to the bar code symbology.
9 3
/ "-15 / "). Furthermore, the distance at which
16 4
E-31