Assembly Procedure - Life Fitness Axiom OP-SLCE Assembly Instructions Manual

Assembly Procedure

Two people will be required for this procedure.
TIP: Read and understand all instructions thoroughly before assembling this unit. Check all items carefully. If there is
damage, see the Customer Service section of this manual for proper procedure to return, replace, or reorder parts.
Assemble Frame Components
1. Tip main frame assembly on it's side and align the pivot boom assembly.
2. Install screws, washers, and locknuts securing the pivot boom assembly to the main frame assembly using an 8mm
Allen wrench and 17mm wrench.
Item
1
2
Item
1
2
3
4
5 Nut, M10 x 1.5, Hex Nylock
Tighten hardware to 40-50 in-lb (4.5-5.6 Nm).
Page 13 of 41
Description
Main Frame Assembly
Pivot Boom Assembly
Description
Pivot Boom Assembly
Main Frame Assembly
Screw, M10 x 1.5, 70mm
Washer, Flat 3/8"
Qty.
1
1
Qty.
1
1
2
4
2