Life Fitness Axiom OP-SLCE Assembly Instructions Manual page 29

4. Install screws and washers securing the pulley support assembly to the tower frame using an 8mm Allen wrench.
5. Install screw and washer securing the pivot shaft to the pulley support assembly using a 7mm Allen wrench.
NOTE: Tighten screws on both sides of the pivot shaft to 20-25 ft-lb (27.1-33.9 Nm).
Item
1
2
3
4
5
Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).
Item
1
2 Screw, M10 x 1.5, 30mm Low Head
3
Page 27 of 41
Description
Pulley Support Assembly
Pivot Shaft
Tower Frame
Screw, M10 x 1.5, 25mm
Washer, Flat 3/8"
Description
Pivot Shaft
Washer, Flat 30mm
Qty.
1
1
1
8
8
Qty.
1
1
1