Assembly Procedure
Two people will be required for this procedure.
TIP: Read and understand all instructions thoroughly before assembling this unit. Check all items carefully. If there is
damage, see the Customer Service section of this manual for proper procedure to return, replace, or reorder parts.
Assemble Frame
1. Install screws and washers securing legs to base using an 8mm Allen wrench.
NOTE: Ensure legs and base are level and contacting the floor before tightening the hardware.
2. Loosely install screws, washers, and lock washers securing center column to base using an 8mm Allen wrench.
Item
1
2
3
4
5
Tighten hardware to 25-30 ft-lb (33-40 Nm).
Item
1
2
3
4
5
Page 11 of 41
Description
Left Leg
Right Leg
Base
Screw, M10 x 1.5, 20mm
3/8" Flat Washer
Description
Base
Center Column
Screw, M10 x 1.5, 25mm
Lock Washer
3/8" Flat Washer
Hand tighten hardware.
Qty.
1
1
1
8
8
Qty.
1
1
4
4
4