Life Fitness Axiom OP-SLCE Assembly Instructions Manual page 31

8. Install screws and washers securing the cable retainer service plate to the cam detent plate using a Phillips
screwdriver.
Install Front and Top Caps
1. NOTE: OPTIONAL: If your product does not include front shrouds, skip this step.
Set front shrouds into the bottom cap. Install screws securing the front cap to the tower frame using a 10 mm
wrench.
Item
1 Cable Retainer Service Plate
2
3 Screw, M4 x 10mm, Phillips
Tighten hardware to 8-10 in-lb (0.9-1.1 Nm).
Item
1
2
3
4
Tighten hardware to 10-13 in-lb (1.1-1.5 Nm).
Page 29 of 41
Description
Washer, M6
Description
Front Cap
Front Shroud, Left
Front Shroud, Right
Screw, M6, HCS, 50 mm
Qty.
1
2
2
Qty.
1
1
1
4