Assembly Procedure
Assemble Frame Components
1. Place shims under the feet of the tower frame.
2. Install screws and washers securing the front support leg to the tower frame using an 8 mm Allen wrench.
3. Install screws and washers securing the rear support leg to the tower frame using an 8 mm Allen wrench.
Item
1
2
Item
1
2
3
Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).
Item
1
2
3
Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).
Page 12 of 34
Description
Tower Frame
Shim
Description
Support Leg, Front
Washer, Flat 3/8"
Screw, M10 x 1.5, 25 mm
Description
Support Leg, Rear
Washer, Flat 3/8"
Screw, M10 x 1.5, 25 mm
Qty.
1
2
Qty.
1
3
3
Qty.
1
3
3