13. Install screws to the seat back assembly using an 8mm Allen wrench.
14. Install screws and washers securing the back pad to the seat back assembly using an 8mm Allen wrench.
15. Install hole plugs to the seat back assembly using a rubber mallet.
Test Unit For Proper Operation.
Item
1
2
Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).
Item
1
2
3
4
5
Tighten hardware to 40-50 in-lb (4.5-5.6 Nm).
Page 33 of 41
Description
Seat Back Assembly
Screw, M10 x 1.5, 25mm
Description
Back Pad
Seat Back Assembly
Washer, Flat 3/8"
Screw, M10 x 1.5, 30mm
Hole Plug, 1"
Qty.
1
2
Qty.
1
1
2
2
4