2
FRUs and compatibility matrixes
For the compatible transceiver modules or cables of cards, see H3C S12500R Switch Series Cards
and Transceiver Modules Compatibility Matrixes.
MPUs
You can install one MPU, or two MPUs for redundancy on the device. Do not install MPUs of different
models on the same device.
Table 2-1 MPUs available for the device
Device model
•
S12516R
•
S12508R
S12504R
Table 2-2 MPU specifications
Item
Processor
SDRAM
Flash
NVRAM
Port
connector
type
Ports
Port
transmission
rate
LSXM1SUPER1
Intel Processor (Quad Core) @ 2.2 GHz
32GB DDR4 SDRAM (two DIMM slots)
4GB EMMC
512 KB
•
RJ-45
•
LC
•
USB (Type A)
•
Mini-USB (Type AB)
•
One console port (RJ-45 connector)
•
One console port (Mini-USB connector)
•
Two 10/100/1000BASE-T ports for
management and upgrade
•
Two Gigabit SFP ports for management
and upgrade
•
One USB port (USB2.0, host port)
•
Two 1PPS/TOD ports for time
synchronization
•
Two SMB clock input ports
•
Two SMB clock output ports
•
Console port: ≤ 115200 bps (default: 9600 bps)
•
SFP port: 1000 Mbps
•
10/100/1000BASE-T port: 10/100/1000 Mbps
Available MPUs
LSXM1SUPER1
LSXM1SUP04TR1
LSXM1SUP04TR1
16GB DDR4 SDRAM (two DIMM slots)
8GB EMMC
•
RJ-45
•
LC
•
USB (Type A)
•
One console port
•
Two 10/100/1000BASE-T ports for
management and upgrade
•
Two Gigabit SFP ports for
management and upgrade
•
One USB port (USB2.0, host port)
•
Two 1PPS/TOD ports for time
synchronization
•
Two SMB clock input ports
•
Two SMB clock output ports
2-1