Call Service; Dial Plan - Fanvil C56 User Manual

Field name
Do Not Disturb
Ban Outgoing
Enable Call Transfer
Semi-Attended Transfer
Enable Call Waiting
Enable 3-way
Conference
Accept Any Call
Enable Auto Handdown
Auto Handdown Time
Enable Silent Mode
Enable Intercom
Enable Intercom Mute
Enable Intercom Tone
Enable Intercom Barge
Turn Off Power Light
DND Return Code
Busy Return
Code
Reject Return Code
P2P IP Prefix
Active URI Limit IP
Action URL Settings
Block Out Settings

4.3.4.3. DIAL PLAN

This phone supports 4 dial modes:
1). End with "#": dial your desired number, and then press #.

Call Service

Select NO Disturb, the phone will reject any incoming call, the callers will be
reminded by busy, but any outgoing call from the phone will work well.
If you select Ban Outgoing to enable it, and you cannot dial out any number.
Enable Call Transfer by selecting it.
Enable Semi-Attended Transfer by selecting it
Enable Call Waiting by selecting it. Then the phone reminds whether redial,
when the callee is busy or rejects. if it's ok and the phone finds out that the
callee is idle by sip message, it will reminds whether redial
Enable 3-way conference by selecting it
If select it, the phone will accept the call even if the called number is not
belong to the phone.
The phone will hang up and return to the idle automatically at hands-free
mode
Specify Auto Hand down Time, the phone will hang up and return to the idle
automatically after Auto Hand down Time at hands-free mode, and play dial
tone Auto Hand down Time at handset mode
Enable Mute Mode by selecting it, the phone light will red blink to remind
that there is a missed call instead of playing ring tone
Enable Intercom Mode by selecting it
Enable mute mode during the intercom call
If the incoming call is intercom call, the phone plays the intercom tone
Enable Intercom Barge by selecting it, the phone auto answers the intercom
call during a call. If the current call is intercom call, the phone will reject the
second intercom call
Enable Turn Off Power Light by selecting it
Specify DND Return code
Specify Busy Return Code
Specify Reject Return Code
Set Prefix in peer to peer IP call. For example: what you want to dial is
192.168.1.119, If you define P2P IP Prefix as 192.168.1., you dial only #119
to reach 192.168.1.119. Default is ".". If there is no "." Set, it means to
disable dialing IP.
Specify the server IP that remote control phone forcorresponding operation.
Specify the Action URL that Record the operation of phone, send these
corresponding information to server, url： http://InternalServer /FileName.xml?
（InternalServer is server ip，FileName is name of xml that contains the
action message ）
Set Add/Delete Limit List. Please input the prefix of those phone numbers
which you forbid the phone to dial out. For example, if you want to forbid
those phones of 001 as prefix to be dialed out, you need input 001 in the blank
of limit list, and then you cannot dial out any phone number whose prefix is
001.
X and are wildcardx means matching any single digit. For example, 4xxx
expresses any number with prefix 4 which length is 4 will be forbidden to
dialed out means matching any arbitrary number digit. For example, 6
expresses any number with prefix 6 will be forbidden to dialed out.
explanation
34