Troubleshooting - Siruba 700Q Instruction Book

定 期 保 養 項 目(表11)
保養循環
Maintenance Cycle
每天
Daily
每週
Weekly
每三個月
Quarterly
每年
Annually
故 障 檢修
1. 清潔送料具上之棉 絮
1. Clean the lint on the feed dog.
2. 檢查油盤是否有足 夠 之液 態 油。 （油量在 油鏡之上、下兩紅漆記號
問）
2. Check if there has enough liquid oil inside the oil pan. (The amount
should be between the red up and down paint mark of the oil level
gauge.)
3. 保持機器及操作台 清 潔
3. Keep the machine and the operation table clean.
4. 清潔手輪濾網上之 棉 絮
4. Clean the fiber on the filter net of the hand wheel.
1. 保持電源外觀乾淨
1. Keep the power cords looking clean and neat.
2. 保持操作面板乾淨
2. Keep the operational panel clean
3. 檢查電源零件是否 鬆 脫或 在 正確 位置
3. Check if the power parts is loosening or still at the right position
1.更換油 盤內之 液態油
1. Change the liquid oil inside the oil pan
1. 檢查傳動皮帶是否 疲 乏或 毀 損
1. Check the transmission belt to see if it is weariful or damaged.
表11/Table11
Periodical Maintenance Items(Table11)
保養項目
Maintenance Items

TROUBLESHOOTING

-44-