Siruba 700Q Instruction Book page 38

2.針與下勾針之關係
(1)當下勾針移至最左時，勾針尖端與針
中心距約3.7 ~ 3.9mm（雙針時以左針
為主）。(圖36)
(2)當下勾針向右移至針中心時（雙針時
以左針為主），針與勾針之間隙為0 ~
0.05 mm。(圖37)
2.The relationship between the needle and the
lower looper.
(1) When the lower looper moves to the
lettest point, the distance between the
looper tip and the middle line of the
needle should be about 3.7 ~ -3.9mm.
For double needles model, the distance
is from the lower looper tip to the middle
line of the left needle.(Fig.36)
(2) When the lower lopper moves right to the
middle line of the needle (use the left
needle as standard when it's double
needle model), the clearance between
them should be 0 ~ 0.5mm.(Fig.37)
-32-
圖35/Fig.35
圖36/Fig.36
圖37/Fig.37