Factory Reset; Resetting The Hub; System Reset - D-Link DE-1824EI User Manual

10BASE-T Stackable Hubs

Resetting the Hub

You can use the console interface to reset the hub stack, either doing a
System Reset (which restarts the hub and is identical to powering the hub off
and back on again) or a Factory Reset (which sets all of the hub's parameters
to what they were when the hub was delivered from the factory).

System Reset

To perform a System Reset,
1.
Choose System Reset from the main menu.
1.
Move the cursor to Yes to confirm the reset and press Enter. The hub
should restart.
6-26
Figure 6 -19 System Reset
Using the Console Interface