♦ Chapter 5.
♦ Chapter 6.
♦ Appendix A.
♦ Appendix B.
♦ Appendix C.
♦ Appendix D.
Table of Contents
Describes how to stack master and slave hubs into
an integrated hub stack.
Describes how to connect workstations to the hub,
and the hub to other hubs and network components
on a local area network.
Using the Console Interface
Describes how to configure the hub and a
manageable stack using the console program.
Provides information on the physical and electrical
specifications of the hubs.
Power-On Self Test
Provides information about the POST messages
used for troubleshooting problems with the hub.
Boot Configuration File
Describes the hub boot configuration file.
Cables and Connectors
Describes the specifications of the cables and
connectors used with the hubs.
10BASE-T Stackable Hubs