The System Configuration Menu screen shows various pieces of information
about your hub, and allows you to set the System Name, System Location,
and System Contact. These settings can be retrieved from the hub using
SNMP requests, allowing these settings to be used for network management
purposes. Each of these fields can contain up to 64 characters:
♦ System Name: corresponds to the SNMP MIB II variable
administrative purposes. The hub's fully qualified domain name is
often used, provided a name has been assigned.
♦ System Location: corresponds to the SNMP MIB II variable
location of the hub for administrative purposes.
♦ System Contact: corresponds to the SNMP MIB II variable
for the person responsible for administering the hub.
Using the Console Interface
, and is used to give a name to the hub for
, and is used to give the name and contact information
Figure 6 -7 System Configuration Menu
, and is used to indicate the physical
10BASE-T Stackable Hubs