Enables or disables authentication failure traps for invalid SNMP
community names. The argument may be
Clears the hub's SNMP community name table.
Adds community to the hub's list of SNMP communities, with access
permissions. The community name can be up to 32 characters long.
Permissions can be
for read-write community access.
Removes all entries from the hub's trap manager list.
Adds the host at address to the hub's SNMP trap manager list. Traps sent
to the host will use community name community, which may be a string
up to 32 characters long.
Sets the hub's node age timer to n seconds. Node aging is used with the
hub's security option to determine how long to keep entries in the node
Boot Configuration File
, for read-only community access, or
10BASE-T Stackable Hubs